On this page
- What is wastewater treatment?
- Why industrial wastewater treatment matters
- How does wastewater treatment work? The 3 stages
- Primary treatment of wastewater
- Secondary treatment of wastewater
- Tertiary treatment of wastewater
- Common industrial wastewater challenges
- Sustainable wastewater management
- FAQs
How does wastewater treatment work? In three stages. Primary treatment removes solids by screening and settling. Secondary treatment uses bacteria to break down dissolved organic matter. Tertiary treatment, also called advanced treatment, filters and disinfects the water before it is reused or discharged.
This guide explains what each stage does, the equipment involved, and how ClearBlu builds each stage for industrial facilities.
Key takeaways
- Wastewater treatment has three stages: primary, secondary and tertiary.
- Primary treatment is physical. Secondary treatment is biological. Tertiary treatment polishes and disinfects.
- The U.S. EPA says secondary treatment can remove up to 90 percent of the organic matter in wastewater.
- ClearBlu builds each stage for industrial facilities, from lift stations and screens to biodigesters and aeration.
What is wastewater treatment?
In the simplest terms, wastewater treatment is the process of removing contaminants from used water so it can be safely reused, recycled, or discharged into the environment. Wastewater can contain:
- Suspended solids and oils
- Organic materials
- Nutrients such as nitrogen and phosphorus
- Chemicals and heavy metals
The goal of wastewater treatment is to separate and neutralize these contaminants before they cause harm to waterways, soil, or ecosystems.
Why industrial wastewater treatment matters
Industrial wastewater treatment goes beyond basic sanitation. In manufacturing, food processing, or energy production, untreated wastewater can:
- Damage local ecosystems by introducing harmful chemicals or excess nutrients
- Increase operational costs through fines, surcharges, or higher disposal fees
- Harm equipment via corrosion or buildup from solids and fats, oils, and grease (FOG)
- Waste valuable resources that could otherwise be recycled back into production
Proper treatment reduces environmental impact and keeps a facility within its discharge limits. Under the U.S. EPA’s National Pretreatment Program, industries must control the pollutants they send to municipal sewers. The EPA’s Primer for Municipal Wastewater Treatment Systems explains that treatment plants receiving significant industrial discharges must run approved local pretreatment programs.
How does wastewater treatment work? The 3 stages
Wastewater treatment works by removing contaminants in order: first the solids that can be screened or settled out, then the dissolved organic matter, then whatever remains. Municipal plants and industrial systems follow the same sequence.
| What it removes | Typical equipment | |
|---|---|---|
| Primary | Debris, grit, solids that settle, and fats, oils and grease | Screens, settling tanks, separators |
| Secondary | Dissolved organic matter, measured as BOD and COD | Aerated biodigesters, ponds and bacteria |
| Tertiary | Nutrients, remaining fine solids and pathogens | Filtration and disinfection |
Primary treatment of wastewater
Primary treatment removes the solids. Screens catch large debris first. Grit and heavier particles then settle out by gravity in sedimentation tanks. In industrial systems this stage also separates fats, oils and grease before they can clog or damage the equipment downstream.

How ClearBlu builds it. ClearBlu supplies lift stations, settling tanks, three-phase separators, waterfall wedge wire screens, a dewatering screw press and pH balancing. Its equipment pages group these under pre-treatment. ClearBlu reports that its wedge wire screens separate material as small as 0.5 millimeters and that its screw press removes 95% of fine solids.
Secondary treatment of wastewater
Secondary treatment is biological. Microorganisms consume the dissolved organic matter that primary treatment leaves behind, which lowers biochemical oxygen demand (BOD) and chemical oxygen demand (COD). The EPA primer says secondary treatment can remove up to 90 percent of the organic matter in wastewater.

How ClearBlu builds it. ClearBlu treats this stage aerobically, with biodigesters, pond aeration, package systems and microbes matched to the waste stream. Its equipment pages call this stage primary treatment. ClearBlu reports that its full aerobic process reduces BOD by 98% or more. Our guide to aerobic digestion covers how it works.
Tertiary treatment of wastewater
Tertiary treatment is any treatment beyond secondary. The EPA calls it advanced treatment. It can remove nitrogen and phosphorus, or polish the water with filtration, adsorption, ion exchange or reverse osmosis. Disinfection with chlorine, ozone or ultraviolet light usually comes last.
How ClearBlu builds it. How much of this stage a facility needs depends on where the water is going: a sewer, irrigation, reuse or direct discharge. See ClearBlu’s tertiary treatment page for its products at this stage.
Common industrial wastewater challenges
Different industries face unique treatment obstacles:
- Food and beverage: High levels of FOG, organic load and variable pH. See ClearBlu’s pages for breweries, wineries and food processors.
- Agriculture: Sediment, nutrients, and pesticide runoff
- Manufacturing: Metals, solvents, and suspended solids
- Energy Production: High salinity and temperature variance
ClearBlu’s modular designs allow systems to be tailored for these challenges ensuring reliable performance even in demanding industrial environments.
Sustainable wastewater management
Modern industrial wastewater treatment isn’t just about compliance, it’s about conservation. By reusing treated water for cooling, irrigation, or process rinse, companies can reduce freshwater demand and strengthen sustainability initiatives.
ClearBlu Environmental incorporates energy-efficient pumps, stainless steel components, and biological treatment systems that minimize chemical use and extend equipment lifespan.

Build the stages your facility needs
ClearBlu designs, builds, installs and services wastewater treatment systems, from a single lift station to a complete package system.
34 Billion
gallons of wastewater processed in the United States every day (U.S. EPA)
Up to 90%
of the organic matter in wastewater can be removed by secondary treatment (U.S. EPA)
209.5 m³
of wastewater produced per person each year in North America (Jones et al., 2021)
Not sure which stages your facility needs? Talk to an expert at ClearBlu.
FAQs
How does wastewater treatment work?
In stages. Primary treatment removes solids by screening and settling. Secondary treatment uses microorganisms to break down dissolved organic matter. Tertiary treatment filters and disinfects what is left.
What are the 3 stages of wastewater treatment?
Primary, secondary and tertiary. Tertiary treatment is also called advanced treatment.
What is the difference between primary and secondary treatment?
Primary treatment is physical: it removes material that floats or settles. Secondary treatment is biological: microorganisms consume organic matter. The U.S. EPA says secondary treatment can remove up to 90 percent of the organic matter in wastewater.
What is tertiary treatment of wastewater?
Any treatment beyond secondary. It can include nutrient removal, filtration and disinfection with chlorine, ozone or ultraviolet light.
Why does ClearBlu call biological treatment “primary treatment”?
ClearBlu’s equipment pages group screening, settling and pH balancing as pre-treatment, and biological treatment as primary treatment. The equipment and the order are the same. Only the labels differ.



